Table of Contents
Advertisement
2.
Gently pull out the tray.
3.
Place your disk, label side up, onto the tray and slightly press the center of the
disk until it locks into place.
4.
Gently push the tray back into the computer.
• Do not leave the tray pulled out. Also, avoid touching the lens in the
tray. If the lens becomes dirty, the disk may malfunction.
• Do not wipe the lens with materials with rough surface (such as paper
towels). Instead, use a cotton swab to gently wipe the lens.
2
2-15
Advertisement
Table of Contents
