Connecting To Ac Power Source - Sharp Actius PC-GP22W Operation Manual

Connecting to AC Power Source

1. Plug the AC adapter cable into the AC adapter jack on the rear side of your
computer.
2. Plug the AC power cord into the AC adapter.
3. Plug the AC power cord into a wall outlet.
• Always use the AC adapter included with the computer. Using other AC
adapters may damage the computer.
• Always hold the AC power cord by its plug when removing it from the
wall outlet. Never pull on the cord.
• When using the computer for the first time, be sure to operate it on AC
power. On battery power instead, you may not be able to complete the
Windows XP setup if the battery does not have enough power.
4. Slide the display cover lock lever to the right until the display cover releases, and
raise the cover.
AC Adapter Jack
AC Power Cord
Display Cover Lock Lever
AC Adapter
To Wall Outlet
1
1-3