Volvo XC90 2018 Owner's Manual page 313

To reactivate ACC from standby mode:
Press the steering wheel button
–
> The speed is then set to the most recently
stored speed.
WARNING
A significant increase in speed may follow
when the speed is resumed with the
steering wheel button.
Related information
Adaptive cruise control* (p. 306)
•
Activating and starting adaptive cruise con-
•
trol* (p. 308)
Change between cruise control and adaptive
•
cruise control* (p. 311)
43 Adaptive Cruise Control
44 Adaptive Cruise Control
Cruise Control
45
Limitations for adaptive cruise
control*
(1).
Adaptive Cruise Control (ACC
tations in certain situations.
Steep roads and/or heavy load
Bear in mind that the adaptive cruise control is
primarily intended for use when driving on level
road surfaces. The function may have difficulty in
keeping the correct distance from the vehicle
ahead when driving on steep downhill slopes - in
which case, be extra attentive and ready to brake.
Do not use adaptive cruise control if the car
•
has a heavy load or a trailer is connected to
the car.
Miscellaneous
Drive mode Off Road
•
when the adaptive cruise control is activated.
NOTE
This function uses the car's camera and radar
units, which have certain general limitations.
Related information
Adaptive cruise control* (p. 306)
•
Limitations for camera and radar unit
•
(p. 337)
Change between cruise control and
adaptive cruise control*
43
) may have limi- In a car with Adaptive Cruise Control (ACC
the driver can change between Cruise Control
45
(CC
A symbol in the driver display shows which cruise
control is active:
Cruise control
WHITE symbol: Function active, GREY symbol: Standby mode
A
Changing from ACC to CC
Proceed as follows:
cannot be selected
1. Set adaptive cruise control to standby mode
using steering wheel button
DRIVER SUPPORT
) and ACC.
CC ACC
A A
Adaptive cruise control
.
* Option/accessory.
44
)
}}
311