Volvo XC90 2018 Owner's Manual page 134

DISPLAYS AND VOICE CONTROL
Protect driver profile
In some cases it is preferable not to save various
settings defined in the car to the active driver
profile. In this case, it is possible to protect the
driver profile.
NOTE
Protecting a driver profile is only possible
when the car is stationary.
To protect a driver profile:
1. Press Settings
in the top view in the centre
display.
2. Press System Driver
3. Select Edit Profile .
> A menu opens, where the profile can be
edited.
4. Select Protect Profile
132
5. Save your profile protection option by press-
ing
> When the profile is protected, settings
Related information
Driver profiles (p. 130)
•
Profiles.
to protect the profile.
Back / Close .
defined in the car will not be saved auto-
matically to the profile. Instead, your
changes must be saved manually under
Settings System Driver Profiles
Edit Profile by pressing Save current
settings to the profile . When the profile
is unprotected, on the other hand, your
settings will be saved automatically to the
profile.
Linking remote control key to driver
profile
It is possible to link your key to a driver profile.
The driver profile along with all of its settings will
then be automatically selected every time the car
is used with that specific remote control key.
The first time the remote control key is used, it is
not linked to any specific driver profile. When the
car is started, the Guest profile will automatically
be activated.
A driver profile can be selected manually without
linking it to the key. When the car is unlocked,
the last active driver profile is activated. Once the
key has been linked to a driver profile, a driver
profile does not need to be selected when that
specific key is used.
Linking a remote control key to a driver
profile
NOTE
Connecting a remote control key to a driver
profile is only possible when the car is sta-
tionary.
First select the profile to be linked to the key, if
the profile to be linked is not already active. The
active profile can then be linked to the key.
1. Press Settings in the top view in the centre
display.