Volvo XC90 2018 Owner's Manual page 177

Using the rain sensor's memory
function
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen.
Activating/deactivating the memory
function
The memory function for the rain sensor can be
activated in such a way that the rain sensor but-
ton does not need to be depressed each time the
car is started:
1. Press Settings in the top view in the centre
display.
2. Press My Car Wipers.
3. Select Rain Sensor Memory
deactivate the memory function.
Related information
Using the rain sensor (p. 174)
•
Using windscreen and headlamp washers
•
(p. 175)
Using automatic rear windscreen wiping
•
when reversing (p. 177)
Wiper blades and washer fluid (p. 172)
•
Using the rear window wiper and washer
•
(p. 176)
Filling washer fluid (p. 637)
•
Wiper blades in service position (p. 636)
•
Replacing windscreen wiper blades (p. 635)
•
Replacing the wiper blade, rear window
•
(p. 634)
Using windscreen wipers (p. 173)
•
to activate/
WINDOWS, GLASS AND MIRRORS
Using windscreen and headlamp
washers
Windscreen and headlamp washers clean the
windscreen and headlamps. Windscreen and
headlamp washers are started using the right-
hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
Move the right-hand stalk switch toward the
–
steering wheel to start the windscreen and
headlamp washers.
> The windscreen wipers will make several
more sweeps once the stalk switch has
been released.
}}
175