Volvo XC90 2018 Owner's Manual page 300

DRIVER SUPPORT
||
NOTE
If the automatic speed limiter function is
•
activated, Road Sign Information* is
shown in the driver display even if RSI
is not activated.
To remove road sign information from the
•
driver display, you must deactivate both
automatic speed limiter and RSI.
When the Automatic Speed Limiter func-
•
tion is activated but RSI is deactivated, no
warnings are given from RSI. RSI must
also be activated in order to receive
warnings.
Deactivate ASL
To deactivate the automatic speed limiter:
Tap on the Speed Sign Assist
–
the function view.
> ASL is deactivated and the button's indi-
cation becomes GREY - SL is activated
instead.
WARNING
After switching from ASL to SL the car will no
longer follow the signed speed limit but only
the maximum speed stored in memory.
22 Road Sign Information – RSI
Automatic Speed Limiter
23
298
Related information
Speed limiter (p. 292)
•
Automatic speed limiter (p. 296)
•
Limitations for automatic speed limiter
•
22
(p. 299)
• Road Sign Information* (p. 365)
button in
Changing the tolerance for the
automatic speed limiter
The Automatic Speed Limiter function (ASL
can be set for different tolerance levels.
It is possible to increase/decrease the signed
speed limit. If, for example, the car follows a
signed speed limit of 70km/h (43 mph) the
driver can instead choose to allow the car to
maintain 75 km/h (47 mph).
Buttons and symbols for the function.
23
)
* Option/accessory.