Volvo XC90 2018 Owner's Manual page 303

Activating and starting Cruise
Control
29
The cruise control function (CC
selected and activated in order to be able to reg-
ulate the speed.
Set cruise control in standby mode
To set cruise control in standby mode:
Press ◀ (1) or ▶ (3) to browse to the sym-
–
bol/function (4).
> The symbol is shown and the cruise con-
trol can then be activated.
Activating/starting cruise control
In order to start the cruise control from the
standby mode, the car's current speed must be
29 Cruise Control
Cruise Control
30
30 km/h (20 mph) or higher. The lowest speed
that can be stored is 30 km/h (20 mph).
To start the cruise control:
) must first be
–
With the symbol/function
press the steering wheel button
> Cruise Control starts and the current
speed becomes the stored speed.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h (20 mph).
Related information
Cruise control (p. 299)
•
Deactivating cruise control (p. 303)
•
Deactivate cruise control and set it in
•
standby mode (p. 301)
Reactivating cruise control from standby
•
mode (p. 302)
Deactivate cruise control and set it
in standby mode
Cruise control (CC
vated so that it is set in the standby mode and
displayed, can be reactivated later.
(2).
To set cruise control in standby mode:
Press the steering wheel button
–
> The cruise control markings and symbols
in the driver display change colour from
WHITE to GREY – cruise control is now
temporarily deactivated and the driver
must then manually control the speed.
DRIVER SUPPORT
30
) can be temporarily deacti-
(2).
301
}}