Docomo STYLE F-07B Instruction Manual page 39

a meh Settings & NWservicesed Security &
Locksef UIMea Change PIN code
PIN2 codeeAuthenticateeEnter the current PIN code
eEnter the new PIN code in New PIN code and the
New PIN code - check fieldseC [Save]
Point
･
To display the PIN1 code entry screen when turning power on,
mehdfca, and then set PIN1 code ON/OFF to "ON".
･
Even if PIN2 code is locked by entering incorrect PIN2 code 3 times
consecutively, making/receiving calls or sending/receiving mail is
available; if PIN1 code is locked by entering incorrect PIN1 code 3 times
consecutively, these operations are unavailable.
･
If the PIN1/PIN2 code is locked by entering an incorrect code 3 times
consecutively, enter the PIN unblocking key (PUK) provided at
subscription. If UIM is locked after entering an incorrect PUK code 10
times consecutively, contact the docomo Shop.
･
PUK code is written on the subscription form (copy for user) handed to
you at subscription in docomo Shop. If you subscribed to FOMA service
other than the docomo Shop, you need to bring a document (a drivers
license etc.) to identify your subscription and UIM to the docomo Shop, or
contact the phone number for "General Inquiries" on the last page of this
manual.
✜
Network security code
b Change
or
Network security code is required when DOCOMO identifies the
subscriber to accept orders at docomo Shop, docomo Information
Center or "お客様サポート (user support)" or when you use Network
Services.
To change the code, "iMenu" in i-mode site ⇒ "お客様サポート (User
support)" ⇒ "各種設定 (確認・変更・利用) (Settings (Check/Change/
Use))" ⇒ "ネットワーク暗証番号変更 (Change Network security code)"
(In Japanese only).
✜
i-mode password
i-mode password is required to register/delete site in My Menu, use
Message Service, subscribe/cancel i-mode charged services, etc.
To change the code, "iMenu" in i-mode site ⇒ "お客様サポート (User
support)" ⇒ "各種設定 (確認・変更・利用) (Settings (Check/Change/
Use))" ⇒ "ｉモードパスワード変更 (Change i-mode password)" (In
Japanese only).
✜
microSD password
You can set a password to microSD card. When using another
terminal with the password-protected microSD card installed, setting
a password to that terminal is also required. On PCs or terminals that
do not have ability to set passwords, data in the microSD card cannot
be used and the card cannot be formatted. However, some microSD
cards may not support this function.
✜
Password (for children)
This password is used as the password for children in Kid-safe mode.
When entry of the password is required, you can alternatively enter
the terminal security code or authenticate your fingerprint.
Kid-safe mode ⇒P42
(At subscription : Set any code.)
(At subscription : 0000)
(Default : 1111)
37