Docomo STYLE F-07B Instruction Manual page 120

◆ Installing manually
❖
For Windows 7
1
Insert the CD-ROM into the PC's CD-ROM drive.
The "F-07B CD-ROM" menu appears. Close the menu screen to install manually.
･
To install from the menu in the CD-ROM→P8 "Installing from the menu in the attached CD-ROM"
Step 2
2
Connect the FOMA terminal to a PC.
･
Make sure that the FOMA terminal is turned ON.
3
(Start)→"コントロールパネル (Control panel)"→"システムとセキュリティ
(System and security)"→"デバイスマネージャー (Device manager)" in "システ
ム (System)" category.
4
On "デバイスマネージャー (Device manager)" screen, right-click on "FOMA
F07B" appeared under "ほかのデバイス (Other devices)"→Click "ドライバーソ
フトウェアの更新 (Update driver software)"
5
Click "コンピューターを参照してドライバソフトウェアを検索します (Search
for driver software, browsing in PC)".
6
Click "参照 (Browse)"→Select "<CD-ROM drive name> : ￥F07B_USB_Driver
￥Win7_32" and click "OK"→"次へ (Next)".
Installation starts.
･
CD-ROM drive name varies depending on a PC to be used.
･
When Windows 7 64 bit is running on your PC, select "Win7_64".
7
When a message indicating the update has been successfully done appears,
click "閉じる (Close)".
8
Repeat step 4 and the following steps to install all other FOMA
communication configuration files.
･
Install the following FOMA communication configuration files
Command Port driver
OBEX Port driver
Modem driver
❖
For Windows Vista
1
Insert the CD-ROM into the PC's CD-ROM drive.
The "F-07B CD-ROM" menu appears. To install manually, close the menu.
･
To install from the menu in the CD-ROM→P8 "Installing from the menu in the attached CD-ROM"
Step 2
2
Connect the FOMA terminal to a PC.
･
Make sure that the FOMA terminal is turned ON.
3
Click "ドライバソフトウェアを検索してインストールします (Search for driver
software and install)".
4
Click "ディスクはありません。他の方法を試します (No disk. Try another
method)".
9