Handling mobile phones near
electronic medical equipment
■ These precautions are based on the
guidelines produced at the Electromagnetic
Compatibility Conference Japan, regarding
the protection of electronic medical
equipment from radio waves emitted by
mobile phone units.
WARNING
Obey the following rules inside
medical facilities.
・
Do not bring FOMA terminal into operating
Do
rooms (ORs), intensive care units (ICUs) or
coronary care units (CCUs).
・
Turn FOMA terminal OFF in hospital wards.
・
Turn FOMA terminal OFF in hospital
lobbies and corridors if electronic medical
equipment could be nearby.
・
If the medical facility has specified zones
where use or possession of mobile devices
is prohibited, obey those instructions.
・
If the function to automatically turn ON the
power is set, cancel the setting before
turning the power OFF.
Turn FOMA terminal OFF in crowded
trains or other public places where
pacemaker or defibrillator wearers
Do
could be nearby.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
Wearers of implanted pacemakers or
defibrillators must carry and use
FOMA terminal at least 22 cm away
Do
from the implanted device.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
When electronic medical equipment
other than implanted pacemakers or
defibrillators are in use outside of
Do
medical facilities (such as in home care
settings), check with the device
manufacturer to determine how the
device is affected by electrical signals.
FOMA terminal's signals may affect the
performance of electronic medical
equipment.
Material list
Part
Material
Exterior
Movable
PC+ABS
case
part Sub-
resin
display
Movable
PC+ABS
part Rear
resin
surface
Movable
PA-GF resin UV hard
part
YOKO-
MOTION
face
Fixed part
PA-GF resin UV hard
Keypad
Fixed part
PC+ABS
Battery,
resin
Back
cover
Hinge
PC+ABS
Movable
resin
side
Hinge
PC+ABS
Fixed side
resin
Display panel
Acrylic resin UV hard
Sub-display panel
Methacrylic
resin
Surface
treatment
UV hard
coating
UV hard
coating
coating
coating
UV hard
coating
UV hard
coating
UV hard
coating
coating
UV hard
coating
13
Need help?
Do you have a question about the STYLE F-07B and is the answer not in the manual?