Docomo STYLE F-07B Instruction Manual page 139

13
Click "ネットワーク (Network)" tab→Set each item as shown below→Click "
設定 (Settings)".
･
Since "QoSパケットスケジューラ (QoS packet
scheduler)" settings in "この接続は次の項目を使用
します (Use these items for this connection)" can
not be changed, leave it as it is.
･
When settings of IP and DNS information have
been requested from the provider, etc. select "イ
ンターネットプロトコル (TCP/IP) (Internet
protocol (TCP/IP))", click "プロパティ (Property)"
and set necessary information.
14
Uncheck all items (
15
Click "OK".
Performing communication→P28
◆ Performing communication via dialup connection
Starting communication and disconnection are explained here.
<Example> Under Windows 7
1
Connect FOMA terminal to a PC.
For USB cable connection→P6
For Bluetooth connection→P13
2
Click (Start)→"コントロールパネル (Control panel)"→"ネットワークの状態
とタスクの表示(Network status and tasks)" in "ネットワークとインターネット
(Network and Internet)" category.
Under Windows Vista
Click (Start)→"接続先 (Dialup connection)"→Select the dialup connection and click "接続
(Connect)"→Go step 4.
Under Windows XP
Click "スタート (Start)"→Select "すべてのプログラム (All programs)"→"アクセサリ (Accessories)"→
"通信 (Communication)" and click "ネットワーク接続 (Network connection)"→Double-click the
connection icon→Go step 4.
3
On "ネットワークと共有センター (Network and shared center)" screen, click "
アダプターの設定の変更 (Change adapter configuration)" appeared on the left
of the top→Double-click the connection icon.
) and click "OK".
28