Docomo STYLE F-07B Instruction Manual page 124

◆ Connecting to a registered PC
When connecting a registered PC to FOMA terminal using Bluetooth, set the FOMA terminal in connecting
stand-by.
1
On the FOMA terminal, m6*4→1.
2
Select "Dial-up(DUN)"→C [Connect].
The FOMA terminal enters dial-up connecting stand-by state, and returns to the stand-by display.
3
Operate for connecting on the PC.
◆ Checking modem
Confirm the name of modem used on a PC or COM port number set for dialup connection.
･
When a PC does not detect FOMA terminal correctly, settings and communication cannot be performed.
<Example> Checking on Windows 7
1
Click (Start)→"コントロールパネル (Control panel)"→"システムとセキュリ
ティ (System and security)"→"デバイスマネージャー (Device manager)" in "
システム (System)" category.
Under Windows Vista
Click (Start)→"コントロールパネル (Control panel)"→"システムとメンテナンス (System and
maintenance)"→"デバイスマネージャ (Device manager)".
Under Windows XP
a Click "スタート (Start)"→"コントロールパネル (Control panel)"→"パフォーマンスとメンテナンス
(Performance and maintenance)"→"システム (System)".
b On the "システムのプロパティ (Property of system)" screen, click "ハードウェア (Hardware)" tab
→"デバイスマネージャ (Device manager)".
2
Double-click the type of each device→Confirm the modem name or COM port
number.
･
Name of Modem or COM port is shown under "モデム (Modem)", "ポート (COMとLPT) (Port (COM
and LPT))".
◆ Stopping dialup communication service
1
On FOMA terminal, m6*2.
2
Select connecting stand-by PC from the registered device list→2.
3
Select "Dial-up(DUN)"→C [Stop].
Dialup communication service stops.
13