Shortcut To Make Projector Stack Settings; Locking The Operation Buttons On The Projector; Bypassing Unused Input Selections; Selecting The Fan Mode - Sharp XG-P560W Operation Manual

6 6 6 6 6 Shortcut to Make
Projector Stack Settings
Normally, settings via web browser are required for
the stack projection. You can skip the settings via
web browser by using "Pair Stack", only when you
use the two projectors for the stack projection.
Note
• Before setting "Pair Stack", select "Master" or
"Slave" on "Stack Setting".
1
Select "Pair Stack" on the "Option
2" menu, and then press ENTER.
• The confirmation screen will be displayed.
2
Select "OK", and then press
ENTER.
• The network settings of the projector will
change as shown below.
Master
IP Address 192.168.150.2
Subnet Mask 255.255.255.0
DHCP Client
Gateway 0.0.0.0
User Name (Reset)
Password (Reset)
Data Port 10002
7 7 7 7 7 Locking the Operation
Buttons on the Projector
This function can be used to lock the use of cer-
tain operation buttons on the projector.
Selectable items
Normal All operation buttons are functional.
Level A Only INPUT/VOL buttons on the
projector are available.
Level B All operation buttons on the projector
are unavailable.
Slave
192.168.150.3
255.255.255.0
OFF OFF
0.0.0.0
(Reset)
(Reset)
10002
Description
Menu operation
8 8 8 8 8 Bypassing Unused Input
Selections
This function allows you to skip the input mode
that you rarely use. You can skip the input modes
when "Auto Search" works.
Selectable items
COMPUTER 1 Sets each input mode selectable
ON
respectively.
COMPUTER 2
DVI, HDMI, Sets each input mode unavail-
OFF
VIDEO, S-VIDEO able respectively.

9 9 9 9 9 Selecting the Fan Mode

This function changes the fan rotation speed.
Selectable items
Normal Suitable for normal environments.
High Select this when using the projector at
attitudes of approximately 1,500 meters
(4,900 feet) or more.
Note
• When "Fan Mode" is set to "High", the fan rota-
tion speeds up, and the fan noise becomes
louder.
0 0 0 0 0 Setting the Auto Restart
Function
Selectable items
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on automati-
cally when the power cord is plugged
into the AC outlet or the breaker switch
is turned on.
Page 47
Description
Description
Description
-63