Hiding The Projected Image (Shutter Function); Displaying And Setting The Break Timer - Sharp XG-P560W Operation Manual

Hiding the Projected
Image (Shutter function)
This function allows you to tempo-
rarily hide the projected image.
1
Press SHUTTER CLOSE.
• The projected image is hidden.
2
Pressing SHUTTER OPEN will
turn the projected image back
on.
Note
In the following cases, hiding will be cancelled
automatically.
• When STANDBY on the projector or on the
remote control is pressed.
• When a caution or information message is
displayed.
• When the power is turned on.
Displaying and Setting
the Break Timer
This function allows you to show the re-
maining time for break during meeting.
1
Press BREAK TIMER.
2
" is displayed, press ',
While "
", \ or | to set the break timer.
• You can set anywhere between 1 and
60 minutes (in 1 units).
• The break timer starts to count down as
soon as ' ' ' , " ' ' " " , \ \ \ \ \ or | | | | | is pressed. " "
Note
• Pressing UNDO will cancel the break timer.
• Auto Power Off function will be temporarily dis-
abled during the break timer.
When no input signal is detected for more than
15 minutes, the projector will automatically enter
the standby mode if the break timer has elapsed.
• The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of "Startup Image" (see page 58).
• When "Slave" is set for "Stack Setting", the
break timer is not displayed. (See page 62.)
Mouse/adjustment
button
(
UNDO button
BREAK TIMER
button
▼On-screen display
SHUTTER
buttons
' / " / \ / | )
-41