Sharp XG-P560W Operation Manual page 28

Connecting the Projector to Other Equipment
Equipment
Video equipment, S-video output terminal
Camera, Video game
Audio output terminal
Video output terminal
Audio output terminal
Monitor RGB input terminal
Amplifier
Audio input terminal
Note
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm
stereo audio cable.
• Video signal for monitor output is analog RGB signal as well as component signal (COMPUTER1/2). DVI
and HDMI input video signals would not be output.
• When the audio from HDMI input is directed to the MONITOR OUT (AUDIO) terminal, output will be
generated as Linear PCM audio.
• HDMI (High-Definition Multimedia Interface) is a digital AV interface that can deliver a high-definition
video signal, multi-channel audio signal, and bi-directional control signal all in just one cable.
• Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the digital
video signal does not degrade when transmitted, and a high-quality image with a simple connection can
be enjoyed.
• The HDMI terminal does not support the CEC signal.
This projector is able to process the following signals when connected to HDMI
equipment:
• Video signal: For details, see "HDMI Support" in the list of "Computer Compatibility Chart" on page 75.
• Audio signal: Linear PCM audio
• Sampling frequency: 48kHz/44.1kHz/32kHz
-26
Terminal on connected equipment
S-video cable (commercially available)
RCA audio cable (commercially available)
Video cable (commercially available)
RCA audio cable (commercially available)
RGB cable (supplied or commercially available)
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
Cable
S-VIDEO
VIDEO
MONITOR OUT
MONITOR OUT
Terminal on the projector