Adjusting The Color Temperature; Selecting The Progressive Mode; Reducing Image Noise (Dnr) - Sharp XG-P560W Operation Manual

Picture Adjustment ("Picture" menu)

3 3 3 3 3 Adjusting the Color Temperature

Selectable items
4500K For lower color temperature for warmer,
reddish incandescent-like images.
For higher color temperature for cooler,
10500K bluish, fluorescent-like images.
Note
• "CLR Temp" cannot be set when "C.M.S. Ad-
justment" on the "C.M.S." menu is set to "sRGB".
(See page 52.)

4 4 4 4 4 Selecting the Progressive Mode

Selectable items
2D Useful to display fast-moving images such
Progressive as sports and action films.
3D Useful to display relatively slowmoving
Progressive images such as drama and documentary
more clearly.
Film Mode Reproduces the image of film source*
clearly. Displays the optimized image of film
transformed with three-two pull down (NTSC
and PAL60Hz) or two-two pull down
(PAL50Hz and SECAM) enhancement to
progressive mode images.
* The film source is a digital video recording with the original
encoded as is at 24 frames/second. The projector can con-
vert this film source to progressive video at 60 frames/sec-
ond with NTSC and PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a high-definition image.
Note
• In NTSC or PAL60Hz, even if the 3D Progressive
mode has been set, the three-two pull down enhance-
ment will be enabled automatically when the film
source has been entered.
• When the image is blurred or noisy, switch to the
optimal mode.
• When using progressive inputs, inputs are directly
displayed so that "2D Progressive", "3D Progressive"
and "Film Mode" cannot be selected.
-50
Description
Description
Menu operation

5 5 5 5 5 Reducing Image Noise (DNR)

Video digital noise reduction (DNR) provides high
quality images with minimal dot crawl and cross
color noise.
Selectable items
Off DNR does not function.
Level 1–3 Sets the DNR level.
Note
• Set a level so as to view a clearer picture.
Make sure to set "DNR" to "Off" in the
following cases:
• When the image is blurry.
• When the contours and colors of moving im-
ages drag.
• When TV broadcasts with weak signals are pro-
jected.
Info
• This function is available for all signals with
VIDEO or S-VIDEO.
• This function is available for 480I, 480P, 576I
and 576P signals with COMPUTER1/2, DVI or
HDMI.
Page 47
Description