Sharp XG-P560W Operation Manual page 50

Using the Menu Screen
There are two methods of adjustment de-
pending on the menu item. Use the appli-
cable method from Example 1 or 2 shown
below.
Example 1: Adjusting "Bright"
3
Press ' ' ' ' ' or " " " to select the item " "
you want to adjust.
• Pressing displays the items on the
lower part of the "Picture" menu.
To adjust the projected
image while viewing it
Press ENTER.
• The selected single adjustment item
(e.g. "Bright") appears instead of the
menu.
• When pressing '
item ("Color" after "Bright") will be dis-
played.
Note
• Press UNDO to return to the previ-
ous screen.
4
Press \ \ \ \ \ or | | | | | to adjust the item
selected.
• The adjustment is stored.
5
Press MENU.
• The menu screen will disappear.
Example 2: Selecting "Signal Type"
3
Press ' ' ' or " ' ' " " to select the item " "
you want to set and then press
ENTER.
4
' ' ' ' or " " " to select the de- " "
Press '
sired item and then press EN-
TER.
5
Press MENU.
• The menu screen will disappear.
-48
' ' or " ' ' " " , the following " "
Single
adjustment
item