Omron SYSMAC CPM1 Operation Manual page 28

System Configuration
1-2-4 NT Link Communications
Programmable Terminal
1-2-5 Peripheral Device Connections
Programming Console
CQM1-PRO01-E
12
Using the NT Link, the CPM1 PC can connected to the Programmable Terminal
(NT Link Interface) through an RS-232C Adapter.
RS-232C Cable
Name
RS-232C Adapter
CPM1 programming can be created or edited with a Programming Console or a
personal computer running the SYSMAC Support Software (SSS).
A CQM1-PRO01-E or C200H-PRO27-E Programming Console can be con-
nected to the CPM1 as shown in the following diagram.
C200H-CN222
C200H-PRO27-E
CQM1-series Programming Console
(The Connecting Cable is attached.)
C200H-series Programming Console
C200H-series Connecting Cables
RS-232C Adapter
Usage
Converts to the Peripheral Port format.
CPM1 CPU Unit
Name
Cable length: 2 m
Cable length: 4 m
Section 1-2
CPM1 CPU Unit
Model Number
CPM1-CIF01
Model Number
CQM1-PRO01-E
C200H-PRO27-E
C200H-CN222
C200H-CN422