Special Functions; Description Of Special Functions; Toner Save Mode - Sharp AL-1000 Operation Manual

4

SPECIAL FUNCTIONS

DESCRIPTION OF SPECIAL FUNCTIONS

This chapter describes the special functions of this copier. Use these functions as needed.
Toner save mode (page 23)
Reduces toner consumption by approximately 10%.
Power save modes (page 24)
The copier has two power save modes of operation: preheat mode and auto power shut-off
mode.
Preheat mode
When the copier enters the preheat mode, the power save (
other indicators will remain on or off as before. In this condition, the fuser in the copier is
maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print (
procedure.
Auto power shut-off mode
When the copier enters the auto power shut-off mode, the power save (
light up and other indicators will go out. The auto power shut-off mode saves more power
than the preheat mode but requires a longer time before starting copying. To copy from the
auto power shut-off mode, press the print (
and press the print (
Auto clear (page 24)
The copier returns to the initial settings a preset amount of time after the last copy is made.
This preset amount of time (auto clear time) can be changed.

TONER SAVE MODE

Press the exposure mode selector key to select the manual (
1
) key. Then make desired copier selections
) key using the normal copying procedure.
) indicator will light up and
) key using the normal copying
) indicator will
) mode.
4
23