Sharp AL-1000 Operation Manual page 15

LOADING COPY PAPER
Remove the pressure plate lock. Rotate the pressure plate lock in the direction of
2
the arrow to remove it while pressing down the pressure plate of the paper tray.
2
Store the pressure plate lock which has been removed in step 2 and the screw
3
which has been removed when unpacking (see page 11, step 2 of REMOVING
PROTECTIVE PACKING MATERIALS) in the front of the paper tray. To store the
pressure plate lock, rotate the lock to fix it on the relevant location.
Adjust the paper guides on the paper tray to the copy paper width and length.
4
Squeeze the lever of paper guide
the paper.
Move paper guide
Fan the copy paper and insert it into the tray. Make sure the edges go under the
5
corner hooks.
14
Pressure plate lock
to the appropriate slot as marked on the tray.
Paper guide B
Do not load paper above the maximum height line (
will cause a paper misfeed.
Screw
and slide the guide to match with the width of
). Exceeding the line
Paper guide A