Setting A Large Original - Sharp AL-1000 Operation Manual

Set the number of copies using the two copy quantity (
6
Press the clear (
A single copy can be made with the initial setting, i.e., when "0" is displayed.
ZOOM
Tens digit
Press the print (
7
To display the number of copies made in a continuous run, press the left
copy quantity key.
To stop copying in the middle of a run, press the clear (
stop and the number in the display will be reset to "0".

Setting a large original

The original cover can be removed to allow copying of bulky objects.
Simply lift the original cover straight up.
1
To reattach the original cover, reverse the above procedure.
2
) key to clear an entry if a mistake is made.
Press the right copy quantity key to set the unit
digit from 0 to 9. This key will not change the
tens digit.
Press the left copy quantity key to set the tens
digit from 1 to 9.
Unit digit
) key.
NORMAL COPYING
, ) keys.
) key. Copying will
3
19