Exposure Adjustment/Photo Copying; Reduction/Enlargement/Zoom - Sharp AL-1000 Operation Manual

EXPOSURE ADJUSTMENT/PHOTO COPYING

Copy density adjustment is not required for most originals in the automatic exposure mode.
To adjust the copy density manually or to copy photographs, the exposure level can be adjusted
in five steps manually.
Set the original and check the copy paper size.
1
Press the exposure mode selector key to select the manual (
2
(
3
Use the light (
3
If exposure level 2 is selected, the two left-handmost indicators for that level will
light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators
for that level will light up simultaneously.
Set the number of copies using the copy quantity (
4
(

REDUCTION/ENLARGEMENT/ZOOM

Three preset reduction ratios and two enlargement ratios can be selected. The zoom function
enables copy ratio selection from 50% to 200% in 1% increments.
Set the original and check the copy paper size.
1
Use the copy ratio selector key and/or zoom (
2
copy ratio.
20
)mode.
) and dark (
) key.
To verify a zoom setting without changing the zoom ratio, press and hold
down the copy ratio display (%) key. When the key is released, the display
will return to the copy quantity display.
To reset the ratio to 100%, press the copy ratio selector key repeatedly until
the 100% indicator lights up.
) keys to adjust the exposure level.
,
,
) mode or photo
) keys and press the print
) keys to select the desired