Getting Started; Introduction; Cautions - Sharp AL-1000 Operation Manual

1

GETTING STARTED

This chapter provides basic information for using the copier.

INTRODUCTION

This copier has been designed to provide intuitive operating ease while requiring a minimum
amount of space. To get full use of all copier features, be sure to familiarize yourself with this
manual and the copier.
For quick reference during copier use, keep this manual in a handy location.
Conventions used in this manual
In this manual, the following icons are used to provide the user with information pertinent to
the use of the copier.
Warns the user that injury to the user or damage to the copier may result if
the contents of the warning are not properly followed.
Cautions the user that damage to the copier or one of its components may
result if the contents of the caution are not properly followed.
Notes provide information relevant to the copier regarding specifications,
functions, performance, operation and such, that may be useful to the user.
Indicates a letter displayed in the display.

CAUTIONS

Follow the cautions below when using this copier.
Place the copier on a firm, level surface.
Do not install the copier in a humid or dusty location.
When the copier is not used for long time, for example for consecutive
holidays, turn the power switch off and remove the power cord from the
outlet.
The fusing area is hot. Exercise care in this area when removing misfed
paper.
When moving the copier, be sure to turn the power switch off and remove
the power cord from the outlet.
Do not look directly at the light source. Doing so may damage your eyes.
Do not cover the copier with a dust cover, cloth or plastic film while the
power is on. Doing so may prevent heat radiation, damaging the copier.
1
3