Operation Panel - Sharp AL-1000 Operation Manual

OPERATION PANEL

q w
q Exposure mode selector key and
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
(p. 20)
w Light and dark keys and exposure
indicators
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level
is shown by a lit indicator. (p.20)
Use to start and terminate user program
setting. (p. 24)
e Alarm indicators
: D r u m r e p l a c e m e n t r e q u i r e d
indicator (p. 27)
: Misfeed indicator (p. 31)
: TD cartridge replacement required
indicator (p. 26)
r Copy ratio selector key and copy ratio
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p. 20)
t Zoom indicator (p. 20)
y Copy ratio display (%) key (p. 20)
u Display
Displays the specified copy quantity, zoom
copy ratio, user program code, and error
code.
e r
200%
MAX.
129%
5 1 / 8 1 / 8 1 / 11
x x
2 2 2
100%
100%
78%
8 1 / 14 8 1 / 11
x x
2 2
64% 8 1 / 11 5 1 / 8 1 /
x x
2 2
50% MIN.
t y u
2
ZOOM
!0 !1
i ON LINE indicator
Lights up when the machine is used as a
printer. To use this machine as a printer,
an optional printer upgrade kit is needed.
Lit: Indicates the machine is ready for
printing or data is being received or
printed.
o Power save indicator
Lights up when the copier is in a power
save mode. (p. 23, 24)
!0 Zoom keys
Use to select any reduction or enlarge-
ment copy ratio from 50 to 200% in 1%
increments. (p. 20)
!1 Copy quantity keys
Use to select the desired copy quantity
(1 to 99). (p. 19)
Use to make user program entries.
(p. 24)
!2 Clear key
Press to clear the display, or press
during a copy run to terminate copying.
(p. 18)
Press and hold down during standby to
display the total number of copies made
to date. (p. 35)
!3 Print key and ready indicator
Copying is possible when the indicator
is on.
Use to set a user program.
i o
!2 !3
7
1