Cisco Nexus 9504 Hardware Installation Manual page 21

Preparing the Site
Component
– 48-port 10-Gigabit Ethernet SFP+ and 4-port 100-Gigabit Ethernet QSFP28 line card
(N9K-X9788TC-FX)
– 36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9736C-EX)
– 36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9736C-FX)
– 36-port 40-Gigabit Ethernet QSFP28 line card (N9K-X9736Q-FX)
– 32-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9732C-EX)
– 32-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9732C-FX)
Line cards that are supported by N9K-C9504-FM-G fabric modules
– 36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9736C-FX)
– 48-port 1/10/25-Gigabit Ethernet SFP28 and 4-port 40/100-Gigabit Ethernet QSFP28 line
card (N9K-X97160YC-EX)
– 48-port 1/100 BASE-T and 4-port 100-Gigabit Ethernet QSFP28 line card
(N9K-X9788TC-FX)
– 16-port 400-Gigabit Ethernet QSFP-DD line card (N9K-X9716D-GX)
Line cards that are supported by N9K-C9504-FM-S fabric modules
– 32-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9432C-S)
Line cards that are supported by N9K-C9504-FM-R fabric modules
– 36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9636C-R)
– 36-port 40-Gigabit Ethernet QSFP28 line card (N9K-X9636Q-R)
– 16-port 1/10-Gigabit SFP, 32-port 10/25-Gigabit Ethernet SFP, and 4-port 40/100-Gigabit
Ethernet QSFP line card (N9K-X96136YC-R
– 36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9636C-RX) with TCAM
Fan Trays
– (N9K-C9504-FAN)
– (N9K-C9504-FAN2)
For example, to determine the maximum amount of power that your fully loaded switch consumes, add the maximum
power consumption of two supervisor B modules (2 x 90 W = 180 W), two system controllers (2 x 26 W = 52 W), four
48-port 100-Gigabit line cards (4 x 1050 W = 4200 W), six fabric modules (6 x 504 W = 3024 W), and three fan trays
(3 x 600 W = 1800 W). The total is 9,256 W.
Step 2 Determine the number of power supplies required to power the modules that are installed in the switch by dividing the
module power requirement amount (see Step 1) by the output wattage (3000 W) of the power supplies installed in the
switch. Round up the fractional result to the nearest ones digit.
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
Planning for Power Requirements
Typical Maximum
346 W 684 W
632 W 792 W
607 W 900 W
571 W 684 W
430 W 720 W
520 W 840 W
270 W 504 W
607 W 900 W
415 W 516 W
346 W 684 W
650 W 1680 W
171 W 251 W
440 W 504 W
140 W 130 W
650 W 902 W
329 W 456 W
213 W 300 W
800 W 1100 W
— —
95W 129 W
105 W 600 W
11