Table of Contents
Advertisement
RE3 UHF Wireless
6.4
Ensure transmitter input sensitivity is set for best signal level
1.
2.
3.
Upon successful completion of this section, your set is ready for operation.
Electro-Voice
While viewing receiver AF meter activity, perform as you would in a normal performance
using proper microphone placement.
Observe the AF meter LED segments. Ideal level should show all green LEDs and the
yellow LED lit on emphasis peaks. An occasional reed LED is OK, but a constant, solid red
LED should be avoided.
Adjust transmitter input sensitivity until step 2 is achieved.
User Manual
Quick setup | en
19
02-2023 | 05 | F.01U.362.808
Advertisement
Table of Contents
