Using The Result List During The Same Session - Electro-Voice RE3-BPOL User Manual

RE3 UHF Wireless
NOTE: This process is required for any system of sets, either a single set system, or a multi-
channel system.
ALL SETS in a multi-channel system operating on the same frequency band MUST use the
same group number.
7.3.4

Using the result list during the same session

A session is the period after a scan but before the receiver powers-down. All scan data is
stored in temporary memory until power-down. The session expires upon receiver power-
down.
During a session, you can return to the result list to select a different channel within the same
group.
1.
2.
3.
4.
5.
6.
Electro-Voice
Enter the main menu and select SCAN by pressing SET.
M
1. Scan
E
2. Frequency
N
3. Group/Channel
U
4. Squelch
Press ▼ to scroll to the Result List. Press SET to enter the Result List.
M
1. All Groups
E
2. Result List
N
3. Current Group
U
4. Return
Scroll through groups using the ▲ or ▼ buttons noting open channel quantity per group.
Select either the same previous group or a new group by pressing SET. This advances to
the channel and CH # highlights.
Result List
CH: 3
G: 1
Open Channel: 12
Press the ▲ or ▼ to scroll through open channels. Note that some channel numbers may
be skipped because they were not clear at the time of the scan.
Press SET on CH number.
This selects that group and channel the set operates on.
Result List
CH: 12
G: 5
Open Channel: 15
This also returns to the Result List on the scan menu.
M
1. All Groups
E
2. Result List
N
3. Current Group
U
4. Return
User Manual
RE3-RX receiver | en 27
02-2023 | 05 | F.01U.362.808