Table of Contents
Advertisement
50
en | RE3-BPT bodypack transmitter
Function
The digit to the left of
the (-) is the group
number.
The digit(s) to the
right of the (-) is the
channel number.
Sensitivity setup
Indication on display:
SEnSit
Display current
sensitivity setting
value
Attenuation setup
Indication on display:
Att
When attenuation is
set to on, the
transmitter audio
input stage is
attenuated by 20dB
RF Output Power
setup
Indication on display:
rFP
NOTE: Does not
appear in 8M Band
menu routine
Auto Off setup
Indication on display:
AUToOF
Assigns a time period
for the transmitter to
automatically turn off
02-2023 | 05 | F.01U.362.808
# of SET
presses
5 - 5
4
5
6
7
8
button
▼ Decreases the group number (1-8) in increments of
one.
CH: #
▲ Increases the channel number (up to 22) in
increments of one.
▼ Decreases the channel number (up to 22) in
increments of one.
To save changes:
Press SET while channel number is flashing; SAVE is displayed /
returns to home screen.
▲ Increases the numeric value in increments of 3dB.
▼ Decreases the numeric value in increments of 3dB.
Setting options (low to high): -15dB, -12dB,
-9dB, -6dB, -3dB, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB.
To save changes:
Press SET while displaying sensitivity numeric value.
SENSIT is displayed briefly / returns to home screen.
▲ changes OFF to On, applying 20dB attenuation.
-6 db
▼ changes On to OFF.
To save changes:
Press SET to store the attenuation status value.
StorE is displayed / returns to home screen.
▲ Changes low to high.
▼ Changes high to low.
High (RFPHI) and the antenna symbol with two bars to
the right will be displayed indicating high RF power.
Low (RFPLo) and the antenna symbol with one bar to
the right will be displayed indicating low RF power.
SAVE is displayed briefly / returns to home screen.
Use ▼ or ▲ to navigate.
Options are: Off, 1 minute, 10 minutes, and 30 minutes.
Displayed as OFF, 1, 10, or 30.
User Manual
RE3 UHF Wireless
Result
Electro-Voice
Advertisement
Table of Contents
