Electro-Voice RE3-BPOL User Manual page 41

RE3 UHF Wireless
ID
3
4
5
6
7
8
9
10
11
12
13
14
Electro-Voice
Item Description, usage, and notes
Control section This section contains the LCD display, three menu navigation buttons,
power button, charging contacts, LED indicator, and the sync port on
opposite side of display.
Sliding menu This sliding cover protects the menu navigation buttons. Sliding the
navigation cover toward the LCD display reveals the buttons. Clos the cover by
button cover sliding it in the other direction protects the buttons.
LCD Display Backlit LCD displays all operating information and menus.
Battery Holds two AA or AA-size rechargeable cells. Install AA cells according
compartment to polarity orientation as shown.
Charging Three charging contacts, one to the left of the power button and two
contact to the right are for use when using the optional BC2 battery charger
and rechargeable cells.
Power button This is a multi-purpose button, function as a power on and off switch,
a transmitter mute switch, as well as a menu escape switch.
To power ON transmitter: press for one second.
To power OFF transmitter: press and hold until transmitter turns off.
PW OFF is displayed.
To MUTE transmitter: press briefly (less than one second). MUTE
appears on LCD.
To UNMUTE transmitter (when muted): press briefly (less than one
second). MUTE disappears on LCD display.
While in parameter edit mode, press to return to home screen.
CANCEL appears on the screen and no setting changes are saved.
Charging Three charging contacts, one to the left of the power button and two
contacts to the right are for use when using the optional BC2 battery charger
and rechargeable cells.
LED indicator Indicates transmitter operating status as follows:
Glows solid green when transmitter is on.
Flashes green when transmitter is in mute mode.
Glows solid red when battery is low.
Transmitter tail The lowermost surface in the display and control section.
end
SET button The most commonly used menu navigation button, it is a multi-
purpose action button which functions as an enter key, a menu
advance key, and a save or store key.
▼ down button This menu navigation button adjusts the value of an editable
parameter. Pressing the ▼ button will decrease the displayed value of
the current parameter, or the next state condition value below the
displayed state value.
▲ up button This menu navigation button adjusts the value of an editable
parameter. Pressing the ▲ button will increase the displayed value of
the current parameter, or the next state condition value above the
displayed state value.
User Manual
RE3-HHT handheld transmitter | en
02-2023 | 05 | F.01U.362.808
41