Electro-Voice RE3-BPOL User Manual page 26

26 en | RE3-RX receiver
2.
3.
4.
5.
6.
7.
8.
9.
10. Either scroll ▼ to Exit and press SET, or press SYNC on the receiver front panel to return
NOTE: This group and channel must be set on the transmitter as well. Follow the SYNC
operation steps to sync the transmitter to the receiver, or manually set the transmitter to this
group and channel.
02-2023 | 05 | F.01U.362.808
Press SET to start, or SYNC to quit.
Scan All Groups
Pr ess "SET" to star t sc an.
Pr ess "SYNC" to quit.
Wait for scanning process to complete.
Scan All Groups
Scanning... 36%
When scan is complete, view the results list.
Scroll through the groups using ▲ or ▼ noting open channel quantity per group.
Press SET on the group number that has the desired number of open channels that best
meets your wireless system needs.
This advances to the CH number.
Result List
CH: 3
G: 1
Open Channel: 12
CH number is highlighted and displays the first open channel in the group. While
highlighted, scroll through the open channels using ▲ or ▼ identifies all opens channels in
the group. Note that some channel numbers do not appear because they are not open at
the time of the scan.
Press SET on the CH number. This selects the group and channel on which to operate.
Result List
CH: 12
G: 5
Open Channel: 15
This also returns to the Result List on the Scan menu.
M
1. All Groups
E
2. Result List
N
3. Current Group
U
4. Return
to the home screen. The selected Group/Channel and associated Frequency displays on
the home screen.
M
9. Keylock
E
a. Display Option
N
b. Reset
U
c. Exit
User Manual
RE3 UHF Wireless
Electro-Voice