Table of Contents
Advertisement
66
en | Technical data
Electrical contact pinouts:
Dimensions (cable length):
Dimensions (head length):
Dimensions (head diameter):
Microphone connector:
Head finish:
Material:
RE3-HW3 headworn microphone
Element type:
Frequency response:
Polar pattern:
Sensitivity: open circuit voltage at 1 kHz:
Maximum SPL:
Impedance:
Power requirements:
Polarity:
Electrical contact pinouts:
Dimensions (cable length):
Dimensions (boom length):
Microphone connector:
Head finish:
Material:
02-2023 | 05 | F.01U.362.808
Pin #1 - Ground, shield
Pin #2 - Audio
Pin #3 - Bias voltage
Pin #4 - N/C
1430 mm (56.3 in.)
26.4 mm (1.04 in.)
10.1 mm (0.4 in.)
4-pin mini plug
Non-reflecting black
Die cast aluminum, steel wire cloth grille,
black flexible PVC cable
Self-biased condenser
30 Hz - 18 kHz
Supercardioid
0.5 mV/Pascal
(-47 dBV/Pa)
130 dB SPL
1000 ohms
3-9 VDC
Positive pressure on diaphragm produces
positive voltage at pin 2 relative to pin 1
Pin #1 - Ground, shield
Pin #2 - Audio
Pin #3 - Bias voltage
Pin #4 - N/C
1150 mm (45.28 in.)
148 mm (5.83 in.)
4-pin mini plug
Non-reflecting black
Black stainless steel painted adjustable
headband frame.
Molded back facing connector joint with
2.5 mm jack for detachable cable, black
textured PU.
Black painted steel 100 mm x 4.5 mm flexible
mic positing tube.
User Manual
RE3 UHF Wireless
Electro-Voice
Advertisement
Table of Contents
