Electro-Voice RE3-BPOL User Manual page 22

22 en | RE3-RX receiver
ID
14
15
16
02-2023 | 05 | F.01U.362.808
Item Description, usage, and notes
AF output jack XLRM (XLR audio output jack). Using a standard balanced
(balanced audio) microphone cable, connect this to the balanced microphone input
jack (mic level) on a mixer, powered loudspeaker, or signal
processor.
Antenna B jack BNC RF jack to attach either a supplied half-wave ship antenna, or
antenna extension coax cable connected to a front-mounted or
remote extension antenna. This jack also supplies 12 volts DC
booster feed to power in-line RF amplifiers or active antennas when
antenna power is set to on (factory default). The RE3 diversity
receiver requires connecting antennas to both antenna jacks.
DC power jack Connection point for receiver's external power supply. This is where
a DC distribution lead connects when using the optional AASP
antenna splitter.
User Manual
RE3 UHF Wireless
Electro-Voice