Table of Contents
Advertisement
The diagram of the position of the center of gravity of the generator, the location indicated by the arrow
-
is adapted to the position to transport the machine, and put it in another way is prohibited.
STARTING
Put the gas lever on the ON position.
-
Put the choke lever on the position 1.
-
Switch on the tool with the ON/OFF switch
-
Pull the starter rope.
-
Push the choke lever back again.
-
Plug the tool to use to the 230 V~ socket.
-
STOPPING
Unplug the tool
-
Switch off the tool with the ON/OFF switch.
-
Put the gas lever on the OFF position.
-
CONNECTION
You can wind the cable around the handle.
-
Start the engine.
-
Plug the supply cord to the socket.
-
08
Advertisement
Table of Contents
