Table of Contents
Advertisement
Step 2:
Mounting the cross brace and the footrest
1.
Mount the two beams (1 & 12) to the ends of the cross beam (6) using two allen bolts (17), four
washers (20) and two lock nuts (22).
2.
Mount the main beam (2) to the two beams (1 & 12) with each two allen bolts (18), four washers
(20) and two lock nuts (22).
3.
Place the board (5) on the main beam (2).
4.
Place the rubber pad (8) on the board (5).
11
Advertisement
Table of Contents
Need help?
Do you have a question about the TF-QT1097 and is the answer not in the manual?