Advertisement
Instructions for Use
Examine the unit before the first use in order to check
for possible shipping damage. When taking a treatment sit
upright and relaxed.
1. After unpacking the device, check the compressor and
accessories for visible damage or defects such as cracks in the
plastic housing, which could expose electrical components.
Contact your retailer to report any damaged product.
2. Before using the device, follow the cleaning instructions as
detailed in this user manual.
3. Attach the supply tube to the compressor and to the bottom of
the nebulizer cup.
4. Open the nebulizer cup by pushing down on the cap
and twisting counter-clockwise.
5. Add prescribed medication into nebulizer cup then turn top
on until secure.
6. Attach mouthpiece or face mask to the nebulizer bottle.
7. Connect the tube to the nebulizer bottle and the nebulizer machine.
8. Ensure connections are secure before turning on
the nebulizer machine.
9. Plug the compressor into the electrical outlet, making sure the
electrical rating shown on the rating plate on the bottom of the unit
corresponds to your main voltage.
10.To start treatment, switch the compressor on by pressing
the ON/OFF switch onto the "I" position.
ATTENTION: This device rated for intermittent use
30 minutes ON / 30 minutes OFF.
11. When mist is visible, begin inhaling with the mouthpiece.
12. When the treatment has been completed, switch the unit
OFF by setting the switch position to "O" and disconnect the
plug from the electrical outlet.
13. Wash the nebulizer and accessories as
described in the cleaning section.
Troubleshooting
If the device does not turn on:
1. Make sure the plug is firmly inserted into the electrical outlet.
2. Make sure the device has been operating within the limits
indicated in this instructional manual (30 minutes ON/30 minutes
OFF).
If the device does not nebulize, or the nebulization
is weak:
1. Make sure the ends of the air tube are fitted tightly onto the main
unit and onto the nebulizer (see connected kit and unit diagram
below)
2. Check whether the nebulizer mask or mouthpiece kit cup chamber
is empty or overfilled with medication.
3. Check whether the nebulizer nozzle is obstructed
(see medicine cup diagram below)
4. Check whether the baffle is inserted properly. The baffle fits over
the medicine cup's interior cone (see medicine cup diagram below).
Connect Mouthpiece or Mask
Fit tube ends
tightly
Medicine cup
Exploded view
Baffle
Closed view
Nozzle
Advertisement
