Table of Contents
Advertisement
Should it be found that the gas taps are difficult to turn, most probably they require
lubrication. This should be done immediately this problem has been noticed as follows.
– Turn off the gas supply to cooker.
– Remove all control knobs.
– Remove control panel.
– Unscrew the two screws which mounts the gas tap to the gas rail.
– Remove the circlip and ignition switch from the front of the gas tap.
– Disassemble the body of the tap.
– Clean cone and housing with cloth soaked in thinners or similar, re-grease as required with
a special gas tap grease.
– Put cone back in housing and rotate a number of times. Remove cone and take off any
excess grease, making sure that gas passages are clear.
– Reassemble all pieces in opposite order to disassembly.
26
Lubrication of the gas taps
Advertisement
Table of Contents
