Defender IIIT Instructions

The ultimate personal safety alarm

Advertisement

Quick Links

IIIT
The Ultimate Personal Safety Alarm

Introduction

The Defender IIIT is fitted with a high intensity strobe bulb that produces a flashing light when the
140dBs* alarm is activated. The Defender IIIT uses a traditional ripcord activation and has an
independent torch function.
The Defender IIIT is Sold Secure and Secured by Design, please see the following websites for
more information: www.securedbydesign.com and www.soldsecure.com

Operation

1.
To operate the alarm, simply pull the ripcord pin out of the socket. To stop the alarm
sounding, replace the ripcord pin into the socket on the top of the alarm.
2.
To use as a torch, simply press in the button on the side of the unit.

Keyring attachment

Attach the key ring provided to the bottom of the alarm, and then attach this to your bag strap.
Hold the ripcord or attach it to yourself with the G-Clip. If the bag is snatched, the ripcord pin is
removed which will activate the alarm and strobe lights will flash to shock and deter the attacker.
The alarm will remain attached to the bag which is likely to cause the thief to drop the item to get
away from the alarm.

Mounted alarm

The alarm can be attached to a fixed point such as a wall to act as a panic alarm. The easy-use
bracket can be screwed to a wall and the alarm easily slides into the bracket and can be removed
again by opening the crocodile clip on the reverse of the handle. The ripcord will be at the top of
the alarm and hang down the side of the alarm. To activate, pull the cord upwards.

Battery installation / replacement

1.
Loosen the two screws on the back cover of the alarm with a small Phillips or Pozi
screwdriver to access the battery compartment.
2.
Remove the old battery and insert a fresh 9V battery in the same polarity.
3.
Refit the back cover and tighten screws.
Remove the screws to
replace the battery (9V)
WARNING
The high output siren fitted to this quality personal alarm may cause ear damage if used at
close range for a prolonged period of time. Keep away from children and pets ears. This
product is designed for use as a deterrent; it does not guarantee protection or personal safety.
defendersecurityproducts.co.uk
Product Code: AL00016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IIIT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Defender IIIT

  • Page 1 Product Code: AL00016 Introduction The Defender IIIT is fitted with a high intensity strobe bulb that produces a flashing light when the 140dBs* alarm is activated. The Defender IIIT uses a traditional ripcord activation and has an independent torch function.
  • Page 2 DON’T FORGET AN AUDIBLE PERSONAL ALARM SHOULD NOT BE EXPECTED TO PROVIDE A COMPLETE SAFEGUARD AGAINST ASSAULT AND USERS SHOULD ALWAYS TAKE SUITABLE PRECAUTIONS TO REDUCE THE RISK OF ATTACK. Defender Security Products Unit 40 Manor Industrial Estate Flint, Flintshire...

This manual is also suitable for:

Al00016

Table of Contents