Defender PHOENIXM2, PHOENIXM22C, PHOENIXM23C, PHOENIXM24C Manual

WHAT'S INCLUDED

PHOENIXM2

• 7" LCD Monitor
• Wireless Camera with Antenna
• 8' Camera Power Supply
• 6' Monitor Power Supply
• SD Card
• Mounting Hardware
• Window Warning Sticker

PHOENIXM22C

• 7" LCD Monitor
• 2x Wireless Cameras with Antenna
• 2x 8' Camera Power Supply
• 6' Monitor Power Supply
• SD Card
• Mounting Hardware

PHOENIXM23C

• 7" LCD Monitor
• 3x Wireless Cameras with Antenna
• 3x 8' Camera Power Supply
• 6' Monitor Power Supply
• SD Card
• Mounting Hardware
• Window Warning Sticker
• Window Warning Sticker

PHOENIXM24C

• 7" LCD Monitor
• 4x Wireless Cameras with Antenna
• 4x 8' Camera Power Supply
• 6' Monitor Power Supply
• SD Card
• Mounting Hardware
• Window Warning Sticker

LET'S GET STARTED

We've designed Defender Phoenix to be simple to setup and use. You should not have to pair your cameras out of the box, but if you need to, follow the instructions in this Quick Start Guide.

Avoid installing the camera in a location where the wireless signal must pass through multiple cement, concrete, or metal structures if possible. This will reduce the transmission range. Optimum range is 150 feet when signal is passing through walls or floors. Microwave ovens (when in use) may cause signal disruption at close range. Buildings with metal frames may also cause signal disruption. Maximum range is 450 feet clear line of sight.

PAIRING YOUR CAMERA(S)

Note: Defender Phoenix cameras can only be paired to one monitor at a time, for a total of 4 paired cameras per monitor. To add a camera to your system, follow these steps.

Note: Hold pairing for 20 seconds or until image appears on screen.

SETTING UP MOTION RECORDING

Your Defender Phoenix system records footage directly to a SD card inserted into the monitor. You can either set motion-based or schedule-based recording.

Step 1: Press the Menu Button to open the Menu, then navigate to "Detect."

Step 2: Select the camera you would like to activate motion notifications for.

Step 3: Select Day time or Night time to adjust motion notifications for that period of the day.

Step 4: Select sensitivity. Repeat Step 3 and 4 if you would like to activate motion notifications or the other remaining period of the day.

Note: Adjust the duration of each motion-based recording by going to Record > Duration in the Phoenix menu.

Setting up a Recording Schedule

Step 1: Press the Menu Button, then select "Record." Navigate to "Schedule Recording" to begin schedule setup.

Step 2: Use the Left and Right Buttons on the keypad to shuffle through days of the week to view a camera-based daily schedule.

Step 3: To modify schedule for a particular day, navigate to "Modify"

Step 4: Use the Left and Right Buttons to cycle through cameras. Select the camera(s) you would like to apply a recording period to.

Step 5: Then, use the keypad to set the recording window for scheduled recordings.

Step 6: Finally, use the Left and Right Buttons to cycle and select days of the week you would like to apply the recording window to.

FREQUENTLY ASKED QUESTIONS

DO I NEED INTERNET TO VIEW MY CAMERAS?
No! To give our customers a without access to Wi-Fi a completely closed circuit option to protect their property, the Phoenix Security System does not use an Internet connection.

CAN I VIEW MY FOOTAGE FROM THE PHOENIX SECURITY SYSTEM ON MY PHONE?
No! As this is a stand-alone Security System with no Internet connection, the Phoenix cannot transmit footage to an app or mobile device.

IS THE PHOENIX SECURITY SYSTEM CORDLESS?
Cordless Security Cameras typically leave you climbing up to your camera every few days or weeks to change the battery and risk a dead battery if you were to forget. Phoenix requires access to a power source at all times.

WHERE DOES MY FOOTAGE RECORD TO?
Included with all of our Phoenix Security Systems is a 16GB SD Card. Expandable up to 256GB SD Card.

HOW MANY HOURS OF RECORDING TIME CAN I GET?
VGA Resolution Recording (30 FPS)
16 GB SD = 176 Hours (Average Recording Time)
32 GB SD = 352 Hours (Average Recording Time)
64 GB SD Card = 704 Hours (Average Recording Time)
128 GB SD Card = 1,408 Hours (Average Recording Time)
256 GB SD Card = 2,816 Hours (Average Recording Time)

WARRANTY

ACTIVATE YOUR WARRANTY

• PROTECT
  Covered for the unexpected
• SUPPORT
  Receive videos, tips & updates for your product
• VALUE
  Exclusive access to special offers

Open your camera & scan this QR code, or visit:

DefenderCameras.com/Warranty

NEED HELP?

ATTENTION
For Returns or Support you MUST contact

DefenderCameras.com/Support

SHARE YOUR MOMENTS WITH US!
#DefenderMoments

/DefenderUSA

@DefenderCameras

Documents / Resources

References

• Activate my Warranty

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Defender PHOENIXM2, PHOENIXM22C, PHOENIXM23C, PHOENIXM24C Manual