Download Print this page
Schacht BABY WOLF FL3001 Assembly

Schacht BABY WOLF FL3001 Assembly

Advertisement

Quick Links

BABY WOLF
A
ssembly
Find out more at schachtspindle.com
Schacht Spindle Company 6101 Ben Place Boulder, CO 80301
303.442.3212
© 2023 Schacht Spindle Company, Inc.
TM
FL3001
FL3013
FL3003
FL3021
FL3011
FL3023
06.23

Advertisement

loading
Need help?

Need help?

Do you have a question about the BABY WOLF FL3001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Schacht BABY WOLF FL3001

  • Page 1 FL3001 FL3013 FL3003 FL3021 FL3011 FL3023 BABY WOLF ssembly Find out more at schachtspindle.com Schacht Spindle Company 6101 Ben Place Boulder, CO 80301 303.442.3212 © 2023 Schacht Spindle Company, Inc. 06.23...
  • Page 2: Before You Begin

    BABY WOLF ssembly PARTS Wrapped onto warp beam: 4-shaft looms: apron bars 400X heddles lease sticks (with holes) tie-ups 1/4" treadle aid dowel (8-shaft and 4 Now-4 Later 8-shaft and 4 Now-4 Later looms: looms only) 800X heddles tie-ups black treadle aid tie-ups Accessory pack: Maintenance &...
  • Page 3 INITIAL UNPACKING UNFOLDING THE LOOM Remove all plastic wrap from Slightly loosen the black fold the loom. knobs on each castle side (Figure 1). Generally, a single turn will do. Remove the front beam: unscrew the front beam screws Loosening the knobs all the way or and barrel nuts holding it in removing them can cause the loom place—see Figure 1.
  • Page 4 FOLDING THE LOOM To prevent treadles from dragging on the floor when the loom is folded, attach every treadle to at least one tie-up cord. Start folding the loom: Make sure the slide lock bars are pulled out all the way. Loosen the fold knobs one full turn and pull them up in their slots.
  • Page 5 (Figure 4A). Repeat across the cloth beam and the warp beam. To attach the apron bar to the apron cords, take a pinch of the cord about 4" from the end (Figure 4B). Insert the pinched cord through the second hole in the cord.
  • Page 6 into the shaft frame. Secure the Loop one end of each tie-up heddle bars into the heddle bar through a hole in the lamm. For hooks. 8-shaft and 4 Now-4 Later looms, there is one tie-up for every lamm Put the shaft back in the loom hole.
  • Page 7 treadle aid dowel and 10 treadle aid tie-ups onto this bar: Starting at one end of the bar, push a brake treadle aid tie-up up through one cable of the holes (an opened paper clip can be helpful) and loop it over the dowel (Figure 7).
  • Page 8 Accessories HIGH CASTLE TRAY WOLF TRAP SECTIONAL BEAM LOOM BENCH Visit our website for more weaving accessories. DOUBLE BACK BEAM – 8 –...

This manual is also suitable for:

Baby wolf fl3003Baby wolf fl3011Baby wolf fl3013Baby wolf fl3021Baby wolf fl3023