8. Attach the console
1. Connect the computer wires together
2. Secure onto the bracket using screws
as shown - (screws are located in the
back of the console)
9. Attach the handlebars
1. secure handlebars onto the front post
using the bolts and washers as shown
2. Connect the hand pulse wire into the
back of the console
Final Checks
Your cross trainer is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
10
95
96
97
FIXINGS:
FIXINGS:
Part
No.
26
26
FIXINGS:
FIXINGS:
Part
No.
96
Part
No.
97
Part
No.
95
x 4
x 4
x 4
x 4