Intended Use; Use And Operation Solely With The Following Machines; Documents Which Also Apply; Software Version - EWM T4.06-Tetrix AC/DC Smart 2.0 Operating Instructions Manual

3

Intended use

Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
3.1

Use and operation solely with the following machines

• Tetrix 230 AC/DC Smart 2.0 (T4.06)
3.2

Documents which also apply

• Operating instructions for the connected welding machines
• Documents of the optional expansions
3.3

Software version

These instructions apply to the following software version:
034
The software version of the machine control can be displayed in the machine configuration menu
(menu Srv) > see 5.6 chapter.
099-00T406-EW501
14.07.2020
Use and operation solely with the following machines
WARNING
Intended use
7