Safety And Instructional Decals - Toro Power Max 926 OHXE Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Order Part No. 112-6633
1. Fast
2. Forward speeds
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—keep bystanders a safe
distance away from the machine.
106-4525
3. Slow
4. Reverse speeds
107-3040
Order Part No. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; shut off the engine before leaving
the operator's position; use the cleanout tool to clear the
chute.
1
3
1. Insert the key.
2. Prime the engine 3 times.
3. Engage the choke.
4. Pull the starter cord.
5. Once the engine is running, disengage the choke.
1. Engine shutoff
2. Slow
3
112-6625
2
x 3
4
5
120-9805
120-9805
125-1102
3. Variable speed control
4. Fast