Safety And Instructional Decals - Toro Power Clear 721 R-C Operator's Manual

Safety and Instructional Decals

Important: Safety and instructional decals are located near areas of potential danger. Replace damaged decals.
1. To engage the rotor blades, hold the control bar against
the handle.
2. To disengage the rotor blades, release the control bar.
1. Cutting dismemberment hazards, impeller and auger—do
not place your hand in the chute; remove the ignition key
and read the instructions before servicing or performing
maintenance.
94-2577
115-5660
Order part no. 117-6036
1. Warning—read the
Operator's Manual.
2. Cutting/dismemberment
hazard, impeller—stop the
engine before leaving the
machine.
3. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
4. Fuel spill hazard—do not
tip machine backward.
5. Engine switch On
5
117-9102
6. Engine switch Off
7. Primer
8. Push the primer three
times to prime the engine.
9. Read the Operator's
Manual before checking
engine oil level.