1MAC456939-IB D
4.2.7
620 series ANSI
Operation Manual
GUID-55FB06BD-BCB4-4CDD-B947-7ED63B1745A4 V1 EN
Figure 35:
Enabled settings
3.
Click Save to save selected parameters in the .csv file format.
4.
Click Print to print all the selected parameters.
Editing values
1.
Select a menu in the left navigation bar.
2.
Click a submenu to see function blocks.
3.
Click a function block to see the setting values.
4.
Click Enable Write.
Some parameters, for example the relay test mode, cannot be set via
the WHMI.
Section 4
Using the HMI
61