ABB RELION 620 Series Operation Manual page 60

Section 4
Using the HMI
52
A070755 V3 EN
Figure 24: Last digit is active and it can only be increased
2.
Press to increase or
One press increases or decreases the value by a certain step. For integer values, the
change is 1, 10, 100 or 1000 (...) depending on the active digit. For decimal values,
the change can be fractions 0.1, 0.01, 0.001 (...) depending on the active digit.
For parameters with defined steps, digits smaller than the step value
cannot be edited.
3.
Press or to move the cursor to another digit.
4. To select the minimum or maximum value, select the arrow symbol in front of the
value.
•
To set the value to the maximum, press
•
To set the value to the minimum, press
A070756 V3 EN
Figure 25: Arrow symbol is active, the value is set to the maximum
to decrease the value of an active digit.
.
.
1MAC456939-IB D
620 series ANSI
Operation Manual