Section 4
Using the HMI
62
GUID-79832AA3-E883-4D37-BAB3-5CDAB211115C-ANSI V2 EN
Figure 36:
Enable writing to edit a value
The selected setting group is shown in the Setting Group drop-down list. The active
setting group is indicated with an asterisk *.
5.
Edit the value.
•
The minimum and maximum values for a parameter are shown in the Min. and
Max. columns.
•
Setting group values are indicated with
GUID-8845E5EB-C84A-4A2F-A645-997427BB0538-ANSI V2 EN
Figure 37:
Editing a value
•
If the entered value is within the accepted value range, the selection is
highlighted in green. If the value is out of range, the row is highlighted in red
and a warning dialog box is displayed. Write to IED is unavailable.
1MAC456939-IB D
.
620 series ANSI
Operation Manual