Table of Contents
Advertisement
Adding and dispensing chemical agents
Checking
consumption
Refill indicator
Dispensing
neutralising agent
50
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in good time to avoid the
dispensing system being sucked completely dry.
When the fill level is low in the
agent you are reminded to refill it.
Confirm the message shown with OK and
Refill the neutralising agent as described.
If it has run out, the machine will be locked for further use.
It will be ready for use again when the supply container has been
replaced.
For adjusting the dispensing concentration, see "Further settings/
Dispensing systems".
DOS 3
supply container for neutralising
DOS
Refill
Advertisement
Table of Contents
