Table of Contents
Advertisement
Installation
Removing the
lid
Steam condenser
Securing to the
worktop
144
Building under a continuous worktop
To build the machine under a continuous worktop the lid must be
removed as follows:
Unscrew both securing screws from the lid at the back of the
machine.
Open the door.
Unscrew the left and right fixing screws.
Lift the lid off.
To avoid steam damage to the worktop the protective foil supplied
(25 x 58 cm, self-adhesive) must be applied underneath the
worktop in the area of the steam condenser.
To improve stability the machine must be secured to the worktop
after it has been aligned.
Open the door.
Screw the machine to the continuous worktop through the holes in
the front trim on the left and right.
Please contact the Miele Customer Service Department to secure it
at the sides to adjacent cabinetry.
Advertisement
Table of Contents
