Refill Indicator; Dispensing Rinsing Agent - Miele PG 8582 Operating Instructions Manual

Refill indicator

Dispensing
rinsing agent
Adding and dispensing chemical agents
Add rinsing agent only until it is up to the "max." mark on the edge

of the funnel.
Close the container.

Wipe up any spilled rinsing agent. This prevents over-foaming

occurring during the next programme.
When the fill level is low in the (DOS 2) supply container for rinsing
agent you are reminded to refill it.
Refill rinsing agent
Confirm the message shown with OK and

refill the rinsing agent as described.

The dispensing concentration is set by the Miele Customer Service
Department.
- If there are spots of water left on load items after reprocessing, then
the dispensing concentration is set too low.
- If clouding or smearing appears on load items, the dispensing
concentration is set too high.
In either case contact the Miele Customer Service Department and

have the dispensing concentration reset.
55