Leds In Buttons - Miele PG 8583 WW ADP LD Operating Instructions Manual

LEDs in buttons

The buttons on the control panel have LEDs (Light Emitting Diodes). They indicate the
status of the machine.
Button
 Button
Programme
selection
buttons ,
 and 
 Button
 Button
Start/Stop
button
 Button
LED Status
ON The machine is switched on.
FLASHES The machine is ready for use.
OFF The machine is switched off.
ON The respective programme has been selected. At the
end of the programme the LED will remain lit until a
different programme is selected.
OFF The programme is not selected or the programme
settings are being selected.
ON A programme has been selected from the
programme list. At the end of the programme the
LED will remain lit until a different programme is
selected.
OFF No programme has been selected from the list or the
programme settings are being changed.
ON The additional "Drying assistance" function has been
activated for the selected programme (not available
for all programmes; see "Programme overview").
OFF The additional "Drying assistance" function has been
deactivated.
ON Programme running.
FLASHES A programme has been selected but not yet started.
GREEN
FLASHES RED A fault has occurred (see "Problem solving guide").
OFF A programme has finished.
ON The door is closed (locked) and there is no
programme running.
FLASHES A programme has finished and the door is closed
(locked).
OFF A programme is running or the door is open
(unlocked).
Guide to the machine
11